Fluffometer Posted February 1, 2016 Share Posted February 1, 2016 Hi all I'm referring to the one in the Labour Valley - Central Workforce Habitation - the one with the crane ride. I've now tried 5 or 6 times to jump onto the moving arm and each time I get teleported back to the starting pipe. I've varied my jump angles but doesn't seem to matter - I can land on the arm and then get zapped straight back to the start point. Anyone come across this / have any ideas how to get past this? Incidentally on another Corellia datacron - the one where you have to run around the side of the building on the edging the same thing happened twice too, although I solved that by staying on the very edge. Link to comment Share on other sites More sharing options...
Fluffometer Posted February 3, 2016 Author Share Posted February 3, 2016 Apologies - cheeky bump as this is still happening. Now happening more on the first crane as well as the second. Link to comment Share on other sites More sharing options...
TUXs Posted February 3, 2016 Share Posted February 3, 2016 I just did this one about 2 weeks ago...had no problem with it. Link to comment Share on other sites More sharing options...
Smuglebunny Posted February 3, 2016 Share Posted February 3, 2016 I just did this one about 2 weeks ago...had no problem with it. same but like a month ago, could be a new bug or who knows... Link to comment Share on other sites More sharing options...
ffsnonamesleft Posted February 3, 2016 Share Posted February 3, 2016 Hi all I'm referring to the one in the Labour Valley - Central Workforce Habitation - the one with the crane ride. I've now tried 5 or 6 times to jump onto the moving arm and each time I get teleported back to the starting pipe. I've varied my jump angles but doesn't seem to matter - I can land on the arm and then get zapped straight back to the start point. Anyone come across this / have any ideas how to get past this? Incidentally on another Corellia datacron - the one where you have to run around the side of the building on the edging the same thing happened twice too, although I solved that by staying on the very edge. I did correlia datacrons just last night. No problems. It's just you. Link to comment Share on other sites More sharing options...
MiguelGx Posted February 3, 2016 Share Posted February 3, 2016 I did correlia datacrons just last night. No problems. It's just you. Failed attempt of trolling detected Link to comment Share on other sites More sharing options...
Rankyn Posted February 3, 2016 Share Posted February 3, 2016 This has been happening since day 1 and it's not the only place in the game where it happens. It's not even the only place it can happen when going after this datacron. Don't stand so close to the vertical part of the elevator. The game gets confused about your location where the two models meet so it warps you back to the beginning. Link to comment Share on other sites More sharing options...
Zantahra Posted March 5, 2016 Share Posted March 5, 2016 Ok, here's what worked for me on this datacron. Wait for the elevator to go all the way down, and instead of jumping for one of the small ledges, jump on top of the main bar above them. Then, when you're well-above the crate, jump down to it. Tried everything to use the ledges and the hatred was strong in me. And then... there it was... lol. Link to comment Share on other sites More sharing options...
Fluffometer Posted March 5, 2016 Author Share Posted March 5, 2016 Thanks folks - I'll give it another go using your tips. Link to comment Share on other sites More sharing options...
MasterSpatula Posted March 5, 2016 Share Posted March 5, 2016 This happened to me a few times. I let the bar pass me and jumped onto the base of the moving part instead and had no problem. Link to comment Share on other sites More sharing options...
Recommended Posts