jibboo Posted April 15, 2013 Share Posted April 15, 2013 I have a feeling that there's an issue with it, but maybe I just don't understand its limitations fully. Here's the scenario: - Did the initial cast at a pylon in Ancient Hypergates - Did some running around and decided to warp back - Activated the warp and nothing happened, but it acted like I activated it as the cooldown count started This has happened at least 6-7 times to me, all in random warzones. Am I doing something wrong? I know of at least two of those times I was out of combat, and had full control of my character. Link to comment Share on other sites More sharing options...
MasterFeign Posted April 15, 2013 Share Posted April 15, 2013 Were you within 60 metres? However, one other bug was mentioned when two of us (as assassins) were dueling). What happened was that I used phase walk and then force lightning. The person I was dueling against, said they could not see the lightning nor my character model, until I moved a little again (somewhat like a load issue). He tested something similar, and I too, saw his character model disappear, fly off, then reappear probably where he was after he teleported. It makes me wonder if this is a rendering issue. Link to comment Share on other sites More sharing options...
jibboo Posted April 15, 2013 Author Share Posted April 15, 2013 Were you within 60 metres? The icon was lit up like I was in range when I used it. Link to comment Share on other sites More sharing options...
Selenial Posted April 15, 2013 Share Posted April 15, 2013 The icon was lit up like I was in range when I used it. Here's the issue, you don't reclick the icon, you right click the buff off your buff bar... Reclicking whilst stationary will make you recast a new spot... Link to comment Share on other sites More sharing options...
CBRGhostRider Posted April 15, 2013 Share Posted April 15, 2013 The phase walk is only active for 2 minutes... after that it goes on cooldown if you haven't used it by then. Maybe you tried to use it just as the 2 min timer expired? Then it would seem that you tried to phase walk, but it went on cooldown without doing anything. Link to comment Share on other sites More sharing options...
murshawursha Posted April 15, 2013 Share Posted April 15, 2013 Here's the issue, you don't reclick the icon, you right click the buff off your buff bar... Reclicking whilst stationary will make you recast a new spot... Not true in my experience. Clicking the icon a second time will activate the teleport and put the skill on CD. Link to comment Share on other sites More sharing options...
Jeeses Posted April 16, 2013 Share Posted April 16, 2013 Not true in my experience. Clicking the icon a second time will activate the teleport and put the skill on CD. This is how it works for me also Link to comment Share on other sites More sharing options...
Caoboi Posted April 16, 2013 Share Posted April 16, 2013 (edited) Yea this confuses me as well. I have been in combat and used it to escape and it is 50/50 on if it will work or not. I also think if you have a dot on you phase walk will not work, but dont quote me on that because im not sure. Im at work at the moment and cant test it out. EDIT: Iv also noticed with my powertech is that if you have anything targeted you can not load your shoulder cannon. This bug might be the same with phase walk, ill have to test this when i get home. Edited April 16, 2013 by Caoboi Link to comment Share on other sites More sharing options...
jibboo Posted April 21, 2013 Author Share Posted April 21, 2013 Up, because this is happening a lot more than it should. I know I'm using it correctly but it still doesn't activate like it's supposed to a large percentage of the time. Link to comment Share on other sites More sharing options...
Astarica Posted April 21, 2013 Share Posted April 21, 2013 If you try to phase walk while you're outside the range it simply gets rid of your last Phase Walk and puts it on CD and I susepct this is probably what's happening here. Although the casting appears to be instantaneous, it seems like it takes about one GCD before you actually teleport so it might be possible for you to have walked just far enough away out of the range before it's done teleporting. Link to comment Share on other sites More sharing options...
hate-wizard Posted April 21, 2013 Share Posted April 21, 2013 The only thing like this I've noticed is that you have to be stationary for it to work, trying to phase walk while moving resets it. Could this be the problem? Link to comment Share on other sites More sharing options...
jibboo Posted April 22, 2013 Author Share Posted April 22, 2013 The only thing like this I've noticed is that you have to be stationary for it to work, trying to phase walk while moving resets it. Could this be the problem? That's not the case. I just tested and not only was I able to get it working while moving, but also while jumping around and moving. Link to comment Share on other sites More sharing options...
jibboo Posted April 22, 2013 Author Share Posted April 22, 2013 If you try to phase walk while you're outside the range it simply gets rid of your last Phase Walk and puts it on CD and I susepct this is probably what's happening here. . That may be the case for most of the instances, but I know that there were a few where the icon was lit up like it was in range. Either way, I think it should give you an Out of Range error when you try to cast it instead of just resetting it. Link to comment Share on other sites More sharing options...
Kurvv Posted April 22, 2013 Share Posted April 22, 2013 I tested this by using phase walk well within 60m (usually about 20-30m away) and out of 8-9 tries, 2 failed. By failed I mean the skill went on cd but did not teleport me to the mark. So it does seem to be bugged. From experience using it in wzs, it seems to work more reliably if you're moving when you use it. Link to comment Share on other sites More sharing options...
mrdert Posted April 22, 2013 Share Posted April 22, 2013 I e had this happen once so far. I was sapped and when I went to teleport, nada. Link to comment Share on other sites More sharing options...
Skolops Posted April 23, 2013 Share Posted April 23, 2013 I am finding this to happen so consistently in Huttball that I am wondering whether or not they intentionally barred it from being used in the opponents end. I will place it in the endzone right on the edge to get back there later. If I try using it from the pit, I reliably go back into the endzone. However, if I try using it from closer to the acid pit - still in range, of course - it just goes on cooldown and does not warp me back. Link to comment Share on other sites More sharing options...
Astarica Posted April 24, 2013 Share Posted April 24, 2013 Although using Phase Walk is instant, it appears it takes about 1 GCD before you actually teleport to that spot. If there's a bug I'd assume something happened to you during this time that somehow caused the teleport to fail. Link to comment Share on other sites More sharing options...
Recommended Posts