Trutuna Posted November 6, 2015 Share Posted November 6, 2015 Can anyone give me a basic or complex (depending on how much time you have) rotation for adv prototype? If possible non abrieviated? Many thanks Link to comment Share on other sites More sharing options...
TACeMossie Posted November 7, 2015 Share Posted November 7, 2015 (edited) Can anyone give me a basic or complex (depending on how much time you have) rotation for adv prototype? If possible non abrieviated? Many thanks Before level 32, there isn't one After 32, the single target rotation consists of: If you're gonna use rail shot at least twice on the target (think 12 seconds), get a bleed on the target from Retractable Blade (RB) (Thermal Detonator can be used before this if you have it). It gets refreshed by rail shot so only use it once. Next, Rocket Punch (RP) on cooldown After the first proc for Rail Shot (your character will laugh when it happens), every 4th attack should be a Rocket Punch or a Magnetic Blast (MB) (flame sweep is fine too with enough targets). Rail Shot (RS) before the next rail shot proc, though it can be in any GCD (so long as it doesn't displace a harder hitting ability) Once you pick up TD (TD) at Level 42, that is used on cooldown, and it should be desynched from Rocket Punch (using it 1/3GCDs before/after RP means it won't conflict with it ever). Delay Rail Shot for Thermal Detonator if you can Once you pick up Energy Burst (EB) at level 58, that is used when it has 4 stacks. It should be delayed for the use of Rocket Punch, Thermal Detonator, or the Rail Shot Proc, but it should delay Rail Shot. TL;DR Its a priority list of 4GCDs Opener: TD -> RB -> RS -> RP -> EB -> RS -> MB -> MB -> Priority List Priority List (Further left = higher priority, each block has its own priority list) TD/4-Stack EB/RS -> RP/4-stack EB/RS/MB/Rapid Shots -> TD/4-stack EB/RS/Rapid Shots -> RP/MB Edited November 7, 2015 by TACeMossie Link to comment Share on other sites More sharing options...
Trutuna Posted November 7, 2015 Author Share Posted November 7, 2015 Before level 32, there isn't one After 32, the single target rotation consists of: If you're gonna use rail shot at least twice on the target (think 12 seconds), get a bleed on the target from Retractable Blade (RB) (Thermal Detonator can be used before this if you have it). It gets refreshed by rail shot so only use it once. Next, Rocket Punch (RP) on cooldown After the first proc for Rail Shot (your character will laugh when it happens), every 4th attack should be a Rocket Punch or a Magnetic Blast (MB) (flame sweep is fine too with enough targets). Rail Shot (RS) before the next rail shot proc, though it can be in any GCD (so long as it doesn't displace a harder hitting ability) Once you pick up TD (TD) at Level 42, that is used on cooldown, and it should be desynched from Rocket Punch (using it 1/3GCDs before/after RP means it won't conflict with it ever). Delay Rail Shot for Thermal Detonator if you can Once you pick up Energy Burst (EB) at level 58, that is used when it has 4 stacks. It should be delayed for the use of Rocket Punch, Thermal Detonator, or the Rail Shot Proc, but it should delay Rail Shot. TL;DR Its a priority list of 4GCDs Opener: TD -> RB -> RS -> RP -> EB -> RS -> MB -> MB -> Priority List Priority List (Further left = higher priority, each block has its own priority list) TD/4-Stack EB/RS -> RP/4-stack EB/RS/MB/Rapid Shots -> TD/4-stack EB/RS/Rapid Shots -> RP/MB Thank you for taking the time to reply this will be very helpful Link to comment Share on other sites More sharing options...
MetaMike Posted November 12, 2015 Share Posted November 12, 2015 I haven't played since launch and I'm hitting the ground running with my powertech, so thank you very much for the help. Link to comment Share on other sites More sharing options...
Recommended Posts