Ya I haven't found any grade 10 grenades anywhere in the game since 5.0 released.

There are no new schematics for grenades in 5.0. Please add.

You are correct. I reported this multiple times but its still not fixed. Some blue augment schematics are not correctly reverse engineering to purple. They sometimes say you already know the schematic when you do not.

Bump. Checked all the possible Jawa Junk vendors, cartel, guild ship, personal stronghold. None of the Grade 10 mats are available. Would appreciate it if the Jawa vendors would sell mats we can use in the expansion.

Bump. It's about a 1 in 8 chance to get grade 10 based on my results of hunting over a 4 hour period.

If it causes the cast to be interrupted what's the difference? The cast should not be interruptible with 3 stacks.

Depredating Volts can be cast while moving. So I do not understand how a utility that causes you to move would also cause your Depredating Volts cast to be interrupted.

It says " Depredating Volts cannot be interrupted and is immune to pushbback" I don't read anything specific into that... other than its not working.

Steps to reproduce: 1. In PVP setting with required gear and opponent 2. Obtain 3 stacks of Harnessed Darkness 3. Note the buff help dialog indicates: Harnessed Darkness (3) Next Force Lightening or Depredating Volts cannot be interrupted and is immune to pushbback. Increases damage dealt by next Force Lightening or Depredating Volts. 4. Have the opponent interrupt the your Depredating Volts or and/or knock/push you back. An example with this is have a Mercenary use their Jet Boost to knock you back during the Depredating Volts. This is the issue. Please resolve this issue. Thank you!

Steps to reproduce 1. Get to the Hard Mode Temple of Sacrifice Underlurker 2. Do not engage the boss to start the fight 3. Stand in between a rock formation 4. Note your position on map inside the fight den 5. Note your position as it relates to a rock or shape/formation in the room visually 6. Type slash stuck and note your position change. This is the issue I am calling to your attention. If at this point you are unable to reproduce it then purposefully wipe on the cross. Then go back in and follow the same procedure from step 1 and you should be able to reproduce it on at least one of your raid members screens at this point. It's typically more prominent the more times you wipe. Please resolve this issue and thank you!

Steps to reproduce: 1. Assign a quick slot to the Death Field ability 2. Set the quick slot to Ctrl-5 3. Set preferences | controls | Quick Ground Target Activation ON 4. Set preferences | controls | Sticky Ground Target Reticule ON 5. Test Death Field activation on training dummy by targeting the dummy and pressing ctrl-5 twice in quick succession to confirm the ability activates as expected 6. Get to final phase of Revan fight, 3rd floor on core in Temple of Sacrifice 7. Test Death Field activation on core by targeting the core and pressing ctrl-5 twice in quick succession to confirm the ability does not activate as expected Please resolve this issue and thank you!

100% Raze proc chance from Discharge and this problem would be solved. Maybe a nice addition to the 6 piece set bonus rework.

Definately proc Raze more often, 100% on Discharge would be great!

This issue is prevalent and continues in 4.x, would like to know when it will be addressed? Possible with the set bonus rework?

I suggest the operations pass is like a buff, each stack of it's seven stacks is consumed per operation entered per new day.

I would like to see an ability action queue usage bar on the UI. Thank you!

Positions on our HM/NiM progression group are still open. If interested please reply.

I have a pub side tank that's geared pretty well. I'm not on pub side all that much so if your looking for me to check gear or test run me or whatever just let me know with a PM here. I currently run imp side on Monday and Thursdays. So Tu/WE would be nice. I like the 8 pm est run time. Hope to see you soon.

Hi! Glad you stopped by... we are forming a new imperial side progression operations team. The team will work through each operation from start to completion and then begin nightmare modes. In need of a Juggernaut Tank, a Marauder , Sniper, DPS Sorcerer and Sorcerer healer, and an Operative healer. The team meets on Monday and Thursday nights, 8 PM to 10 PM EST. On occasion, when agreed we may run over to 11PM. Please send a private message to me if interested in joining our team. Click the image to the left, then click on contact info, then click "Send a private message to prairieprof". See you soon!

This is a schematic you learn from the training vendor and then RE for higher grade. It's still broken.

But yet it doesn't explain why a 550 Armormech cannot RE it.

After crafting an Absorb Augment 28 using my subscribed 550 Armormech I see "No Research Available" requires Armormech (440) while hovering over the augment. But I am in fact a level 550 Armormech and I do not already know the level 52 advanced artifact grade schematic. I created my toon using the new level 60 slot. Then I unlearned the craft she came with and learned Armormech. I suspect this caused some sort of issue with the requirement to Reverse Engineer some schematics. Because this randomly effects some RE'ing on anyone having created a new level 60 toon and Re'ing items for schematics. I've confirmed this with others in my guild. Support keeps closing my case saying that they see I can RE other things just fine and that I am not trying enough times. But I would never succeed if it says Requires Armormech 440 and "No Research Available".

After crafting an Absorb Augment 28 using my subscribed 550 Armormech I see "No Research Available" requires Armormech (440) while hovering over the augment. But I am in fact a level 550 Armormech and I do not already know the level 52 advanced artifact grade schematic. I created my toon using the new level 60 slot. Then I unlearned the craft she came with and learned Armormech. I suspect this caused some sort of issue with the requirement to Reverse Engineer some schematics. Because this randomly effects some RE'ing on anyone having created a new level 60 toon and Re'ing items for schematics. I've confirmed this with others in my guild. Support keeps closing my case saying that they see I can RE other things just fine and that I am not trying enough times. But I would never succeed if it says Requires Armormech 440 and "No Research Available".

Try it out on Belsavis out where the packs of 3 lurkers are at. See what you get. I'm level 65 btw.

I'm running Hatred spec and when I use Discharge and Creeping Terror on a single target, for example, I am expecting to see these DoTs on all secondary targets within 5 meters of my Lacerate. However, after checking this and confirming target ranges and such I only ever see the DoTs on my primary target. Switching to secondary targets within Lacerate range after performing a Lacerate directly following a DoT to a primary I never see any DoT debuff on those. So is DoT spreading not working at all then?